Site internet de Rotronics en Français Rotronics website in English

Author Archive

20
Déc

Rotronics wishes you a nice end of year


Warning: Illegal string offset 'thumb_image' in /homepages/27/d163631185/htdocs/SiteRotronicsWP/en/wp-content/themes/vulcan/archive.php on line 54

Our team presents its best wishes for the new year.  This year has been pretty busy on our side ! We have delivered this year more than 30 test benches to our customers : some industrial projects, some chassis dynos or hub dynos, karting test benches and a few flowbench !   Wishing you all a lovely holiday season, time to be with your family and friends. Of course, we wish you luck and all the best in the new year! Best wishes 2019   Company will close on the 21st at 12:00. Opening on the 2nd of January.

28
Nov

6450 HP on an AUTOSCAN DYNO


Warning: Illegal string offset 'thumb_image' in /homepages/27/d163631185/htdocs/SiteRotronicsWP/en/wp-content/themes/vulcan/archive.php on line 54

AUTOSCAN DYNO Today we want to share with you a funny timelapse video produced by one of our german customers on an AUTOSCAN dyno. BMW compilation ! https://youtu.be/_LaC3_P0FXg 11 hours summarized in 2'40 for an amazing 6450HP !!! This customer is well known for mad dyno days that have been done since we delivered the dyno. they reached already 378kph with an aventador thanks to the 400km/H option. AUTOSCAN is more than ever the most versatile dyno capable to pass light cars (NORMA <600kg) up to the wildest & powerful ones (GTR >1500CH). Compared to our competitors, our synchronisation FRONT/REAR is effective up to the max speed (300kph as standard or 400kph with special version. 2 ou 3 strong eddy current brakes allow to pass the car respecting the natural behavior of the ECU (Power curves under road load simulation since 2000). There are also plenty of details that giev you an easy time in your daily actions. > auxillary rollers for easy car installation > straps and plate included > powerful and evolutive software for all your development needs. > Lambda, OBD & weather station in basic version for efficient & accurate tuning procedures

07
Nov

Professional Motorsport World Expo : Rotronics again in Germany


Warning: Illegal string offset 'thumb_image' in /homepages/27/d163631185/htdocs/SiteRotronicsWP/en/wp-content/themes/vulcan/archive.php on line 54

Here we are at Koln for automotive competition at Professional Motorsport Word Expo :   ABout Professional Motosport World expo, primary attendance is motorsport engineering and technical people, race car builders, team managers and principals, and motorsport equipment dealers and distributors. The expo has transformed the fortunes of countless exhibitors who have changed their business profiles as a result of their participation at the show, from national to pan-European, and in some cases to global.       Fair is from the  7th to the 9th of November at Köln, inside the KolnMesse. We are present on the booth n°3064.   To discover this year at our booth: our chassis dyno AUTOSCAN, and the new one EASYSCAN. our hub dyno Hubscan : please come and discover a real pod in our stand ! engine test bench flowbench   We speak English, German, Dutch, and of course French : feel free to come and meet us ! The fair is open from 10 AM to 5 PM from Wednesday to Friday !

13
Sep

FABULOUS GOODWOOD REVIVAL


Warning: Illegal string offset 'thumb_image' in /homepages/27/d163631185/htdocs/SiteRotronicsWP/en/wp-content/themes/vulcan/archive.php on line 54

FABULOUS GOODWOOD REVIVAL : CLASSIC CARS At Rotronics we're in love with Classic cars , especially pushed to the maximum . That is the reason why we love GOODWOOD REVIVAL. this 2018 event has exceed our expectations. ! Living up to his reputatio & their talented and engaged drivers , it is all about drifting and WOT ! 99% of the time it is beautiful and  breathtaking considering the price of the cars..., Below is a video that is ended upside down for a nice Cortina. https://www.youtube.com/watch?v=T3dC9hVHdkU&feature=push-fr&attr_tag=FNFIZhqk72SEGy7z%3A6 Don't hesitate to call us for all your dyno needs related to classic cars.   #dyno # classiccars #performance #rotronics

11
Sep

Feedback on chassis dyno AUTOSCAN


Warning: Illegal string offset 'thumb_image' in /homepages/27/d163631185/htdocs/SiteRotronicsWP/en/wp-content/themes/vulcan/archive.php on line 54

We are very proud to work since more than 2 years now with Marchetto Motorsport (40km from Venise, province of Padova in Italy). Please find his feedback on chassis dyno AUTOSCAN ! Our customer is the owner of a chassis dyno from Rotronics : Autoscan, the state of the art roller test bench ! The dyno is a 2 brakes version, with motorbike compatibility but also extended Multi Peripherical Interface ! Synchronized with a toothed belt, you are able to make your own mapping and power measurement for very powerful cars but also cars with a very sensible electronic system ! For sure, it is possible to have a 2nd brake at the front of the dyno to have a strong system that can test cars more than 1200 HP, up to 300 km/h As a reminder, ExtendedMulti Peripherical Interface is the possibility to have lambda measurement (lambda probe are supplied with the dyno). It is also possible to measure 6 analog signals and 8 thermocouples. Of course, as a dynamometer designer and manufacturer, we have the capacity to adapt our product to your specific need and to developp a tailor made solution.     Feedback on chassis dyno AUTOSCAN of our customer Marchetti Motorsport is very clear :       "As you can see we have believed a lot in this test bench And we were right !! Continuing to use this bench can be understood according to its continuous repetition  and precision .. the installation of the car in the ...

31
Août

Engine tuning on Vortex for 24h racing at Barcelona


Warning: Illegal string offset 'thumb_image' in /homepages/27/d163631185/htdocs/SiteRotronicsWP/en/wp-content/themes/vulcan/archive.php on line 54

We are closer than ever to 24h racing at Barcelona. After engine tuning on hubdyno Hubscan, less than a week before starting the race! 24h race wil take place this year on 8 and 9th of September. What it will look like : qualification on friday, then start of the race on the 8th à 12:00 !   As a reminder, tuning of this nice engine has been realized on our hub dyno Hubscan ! Our Hubdyno was also used to run the brake-in process, thanks to high performance brakes and with an incomparable level of precision !   Hubscan is the solution for racing customers who are not so keen on chassis dyno. Because we have two brakes on hub dyno instead of one on a usual chassis dyno, we have  a higher braking torque. Furthermore, driven by high performance electronic cards, and with its concept of connexion directly to the Hub, it's an incomparable accuracy and a versatility of vehicle tested ! Eddy current brakes, rather than hydraulic braking, enables the customer to have a higher accuracybecause better regulation of braking force!   Finally please find all the informations about Hubscan : www.rotronics.com/en/products/hub-dyno-hubscan/   Also, for the race, everything is here : https://www.circuitcat.com/en/events/24-horas-de-barcelona-trofeo-fermi-velez-en/

13
Juil

HUBSCAN tests the VORTEX V8 #HUB #DYNO


Warning: Illegal string offset 'thumb_image' in /homepages/27/d163631185/htdocs/SiteRotronicsWP/en/wp-content/themes/vulcan/archive.php on line 54

HUBSCAN 2WD  , HUB DYNO tests today a new race vehicle : VORTEX V8 Powered by a V8 6.3l, Hubscan prooved another time his high versatility to pass heavy or light race cars  . Power curves will remain hidden but you can trust us, this baby is breathing ;-) Tuning test on HUBSCAN HUB DYNO https://youtu.be/1033NTLCF6c vehicle during the 24h of Dubai We wish thm the best for the coming races. http://vortexsas.fr/  Hubscan 2WD can be ordered 4WD or could be upgrade later to test SUBARU, electronic transmission, etc. Right now the max power is 700hp. But related to the load we recorded we're thinking that the dyno can pass +1000HP in perfect conditions. Above this power, curves are still possible but time is shorter so with a minimum lack of repetitivity. Rotronics expands his range of products with this hub dyno to adress all your R&D and tuning needs. Feddback of experience from world known customer like ORECA as well as our industrial realizations allow us to design innovative and powerful solution in accordance with your budget. That is the reason why our software solutions are in the mean time easy to operate (only couple hours of training) but also offering expert features. Do not hesitate to contact us for your requests on hub dyno , power dyno, engine dyno ... Coming soon  : after SPA & MAGNY COURS , HUBSCAN participated to the Pikes peak race !

28
Mai

HUBSCAN HUBDYNO passed all germans cars : XDRIVE, QUATTRO nothing impossible


Warning: Illegal string offset 'thumb_image' in /homepages/27/d163631185/htdocs/SiteRotronicsWP/en/wp-content/themes/vulcan/archive.php on line 54

HUBSCAN : 4WD  Hubdyno is under heavy testing in our factory to prove his high level of compatibility with the most common 4WD management. HUBDYNO : 2WD mode this version already passed already a lot of exotic cars in our first customers locations : As an example Lotus, Lamera Cup, Lazareth R1, SILVA S15   HUBDYNO : 4WD Mode Following the subaru and its numerous control setups , we passed BMW X3, FORD MONDEO, AUDI S5 and many more...    testing @rotronics is not an easy time for the dyno ! Max power, Max speed, Max torque, we're testing intensively. HUBSCAN shows not only its versatility but also its enhanced accuracy, compare to a traditional chassis dyno, no more concern about tyres pressures or temperatures. For the sharpest tuning project, it is definitively an added value, by this way you can reach not only the power balance but also the torque on each wheel ! Nevertheless mounting the car is requesting less than 5min/wheel and needs no strapping at all. It is complementary to a chassis dyno and can be move from one ...

21
Mai

Rotronics at Testing Expo 2018 in Germany


Warning: Illegal string offset 'thumb_image' in /homepages/27/d163631185/htdocs/SiteRotronicsWP/en/wp-content/themes/vulcan/archive.php on line 54

Rotronics will be pleased to meet you at Testing Expo Germany from the 5 th to 7th of June at Stuttgart Automotive Testing Expo, it's the world's leading trade fair for automotive test, evaluation and quality engineering     We will be on booth n°1256, feel free to come and see us to discover our live demos of Hubscan ! Print your pass here         We will display our hub dyno Hubscan in a 2WD version. The bench will be mounted on electric Renault Twizy. You will be able to discover the way of mounting the dyno, the way it works but also all the benefits provided by our software solution Kronos (driving cycle for to prepare acceptance tests for example) Of course, our test bench is also available for 2WD and 4WD vehicles, in braking and loading versions. In addition, some example of R&D projects realized  : Valve train test bed with fast angle based acquisition Kronos Revolution combustion tool End of line test bench for motorbike engine End of line test bench for braking checking   Still available: 24 & 48 inches chassis dynos Hub dynos Engine test bench (thermal, hybrid or electrical) Educational solutions Flow bench     Feel free to come and meet us on booth n°1256 or to contact us if you have any questions : contact@rotronics.com / 0033 4 50 0308 59

03
Avr

Rotronics in Germany at TOP CAR PERFORMANCE !


Warning: Illegal string offset 'thumb_image' in /homepages/27/d163631185/htdocs/SiteRotronicsWP/en/wp-content/themes/vulcan/archive.php on line 54

Rotronics is strenghtening its presence in Germany at Top Car Performance!  ! We have now more than 10 dynos on the other side of the Rhine ! Some pictures of our latest customer TOP CAR PERFORMANCE at Bad Mergentheim, between Francfort and Nuremberg ! The chassis dyno we are speaking about is an AUTOSCAN X4+ with 2 brakes, motorbike compatibility and quad compatibility ! Of course, software langage is in German and  one difference about the soft between Germany and other countries : display of the power loss to the final customer. Dynamometer has been installed in August 2017 : one technician of our company has been on site to install and realize the commissioning of the bench. As usual, at the end of installation, we have realized a complete training to teach the customer and all his team the way of working of our product ! Dynamometer has been delivered with high power FAN and computer.