COVID
-->
Site internet de Rotronics en Français Rotronics website in English Rotronics website in German IAE website in chinese

Blog

22
Oct

Rotronics workshop : welcome !

Please find an overview of our workshop today !

As a reminder, all our dynos are designed, manufactured and commissioned by us, in house. We are based in France, close to Geneva airport.

As you can see, we have everything available at Rotronics workshop to realize the dynos : from boilermaking to welding, with roller balancer and machining tools !

L’attribut alt de cette image est vide, son nom de fichier est 20201022_094047-576x1024.jpg.
Boilermaking zone
L’attribut alt de cette image est vide, son nom de fichier est 20201022_094336-1-1024x576.jpg.
Machining tool
L’attribut alt de cette image est vide, son nom de fichier est 20201022_094011-1024x576.jpg.
Roller balancer

Painting is the only step realized out of the workshop.

Our workshop contains 8 production areas.

L’attribut alt de cette image est vide, son nom de fichier est 20201022_091810-1024x576.jpg.
8 areas dedicated to production

For example, just today, we are manufacturing :

  • 2 Autoscan
  • 2 Easyscan, above the ground configuration
  • 1 Hubscan V2
  • 1 tractor dyno
  • Subassembly mounting on the other places.
L’attribut alt de cette image est vide, son nom de fichier est 20201022_091851-1-1024x576.jpg.
Above the ground Easyscan

As a reminder, our solution above the ground includes ramps, wheel mounted, that you can fold to take fewer space.
Please also note that anchor points are directly on the dyno : there is absolutely no impact on your own workshop!

L’attribut alt de cette image est vide, son nom de fichier est 20201022_094244-1-1024x576.jpg.
workshop from the other side

Once mounted, wiring and test / calibration are realized.

As a reminder, Rotronics tests and calibrates absolutely all the dynos manufactured for high precision and high repeatability. Before unmouting for shipment, dyno is fully operationnal!

Compared to our competitors, we don’t always apply the same figures for power loss acquisition but the figures measured on your dyno ! While calibration, we measure all the parameters of the dyno and set it inside the software !

Feel free to contact us if you have any questions on our products or company. We are fully available to show what we offer and how we realize it !


Comments are closed.